2SA2016 / 2sc5569 no.6309-1/5 applications ? relay drivers, lamp drivers, motor drivers, flash. features ? adoption of fbet and mbit processes. ? high current capacitance. ? low collector-to-emitter saturation voltage. ? high-speed switching. ? ultrasmall package facilitales miniaturization in end products. ? high allowable power dissipation. specifications ( ) : 2SA2016 absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit collector-to-base voltage v cbo (--50)100 v collector-to-emitter voltage v ces (--50)100 v collector-to-emitter voltage v ceo (--)50 v emitter-to-base voltage v ebo (--)6 v collector current i c (--)7 a collector current (pulse) i cp (--)10 a base current i b (--)1.2 a collector dissipation p c mounted on a ceramic board (250mm 2 5 0.8mm) 1.3 w tc=25 c 3.5 w junction temperature tj 150 c storage temperature tstg --55 to +150 c electrical characteristics at ta=25 c ratings parameter symbol conditions min typ max unit collector cutoff current i cbo v cb =(--)40v, i e =0a (--)0.1 m a emitter cutoff current i ebo v eb =(--)4v, i c =0a (--)0.1 m a dc current gain h fe v ce =(--)2v, i c =(--)500ma 200 560 gain-bandwidth product f t v ce =(--)10v, i c =(--)500ma (290)330 mhz marking : 2SA2016 : aw 2sc5569 : ff continued on next page. sanyo electric co.,ltd. semiconductor company tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan ordering number : enn6309b 62405ea ms im tb-00001406 / 52501 ts kt ta-3259 any and all sanyo products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo representative nearest you before using any sanyo products described or contained herein in such applications. sanyo assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo products described or contained herein. 2SA2016 / 2sc5569 pnp / npn epitaxial planar silicon transistors dc / dc converter applications
2SA2016 / 2sc5569 no.6309-2/5 continued from preceding page. ratings parameter symbol conditions min typ max unit output capacitance cob v cb =(--)10v, f=1mhz (50)28 pf collector-to-emitter saturation voltage v ce (sat)1 i c =(--)3.5a, i b =(--)175ma (--230)160 (--390)240 mv v ce (sat)2 i c =(--)2a, i b =(--)40ma (--240)110 (--400)170 mv base-to-emitterr saturation voltage v be (sat) i c =(--)2a, i b =(--)40ma (--)0.83 (--)1.2 v collector-to-base breakdown voltage v (br)cbo i c =(--)10 m a, i e =0a (--50)100 v collector-to-emitter breakdown voltage v (br)ces i c =(--)100 m a, r be =0 w (--50)100 v collector-to-emitter breakdown voltage v (br)ceo i c =(--)1ma, r be = (--)50 v emitter-to-base breakdown voltage v (br)ebo i e =(--)10 m a, i c =0a (--)6 v turn-on time t on see specified test circuit. (40)30 ns storage time t stg see specified test circuit. (225)420 ns fall time t f see specified test circuit. 25 ns package dimensions switching time test circuit unit : mm 7008-003 2.5 4.0 1.0 1.5 0.5 0.4 3.0 4.5 1.6 0.4 123 1.5 top view bottom view 1 : base 2 : collector 3 : emitter sanyo : pcp v r r b v cc =25v v be = --5v + + 50 w input output r l 100 m f 470 m f pw=20 m s i b1 d.c. 1% i b2 i c =20i b1 = --20i b2 =2.5a for pnp, the polarity is reversed. i c -- v ce i c -- v ce collector-to-emitter voltage, v ce -- v collector current, i c -- a collector-to-emitter voltage, v ce -- v collector current, i c -- a 7 6 5 4 3 2 1 0.4 0.8 1.2 1.6 2.0 0 0 i b =0ma -- 7 -- 6 -- 5 -- 4 -- 3 -- 2 -- 1 0 0 --0.4 --0.8 --1.2 --1.6 --2.0 --10ma --20ma --30ma --40ma --50ma --60ma --70ma --80ma --90ma --100ma 10ma 20ma 30ma 40ma 50ma 60ma 70ma 80ma 90ma 100ma i b =0ma it00206 it00207 2sc5569 2SA2016
2SA2016 / 2sc5569 no.6309-3/5 h fe -- i c h fe -- i c dc current gain, h fe collector current, i c -- a collector current, i c -- a dc current gain, h fe i c -- v be i c -- v be base-to-emitter voltage, v be -- v collector current, i c -- a base-to-emitter voltage, v be -- v collector current, i c -- a 8 7 6 5 4 3 2 1 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 2sc5569 v ce =2v ta=75 c 25 c --25 c ta=75 c 25 c --25 c 2SA2016 v ce = --2v -- 8 -- 7 -- 6 -- 5 -- 4 -- 3 -- 2 -- 1 0 0 --0.2 --0.4 --0.6 --0.8 --1.4 --1.0 --1.2 it00208 it00209 --1000 --100 2 3 5 7 2 3 5 7 2 3 5 7 --1.0 --10 --0.01 --0.1 23 57 23 57 2 3 57 --1.0 --10 ta=75 c --25 c it00212 2SA2016 i c / i b =20 1000 100 2 3 5 7 2 3 5 7 10 2 3 5 7 1.0 0.01 0.1 23 57 23 57 23 57 1.0 10 ta=75 c --25 c it00214 2sc5569 i c / i b =20 ta=75 c 25 c --25 c 1000 100 7 5 3 2 7 5 3 2 10 --0.01 3 25 --10 --0.1 73 257 3 257 --1.0 2SA2016 v ce = --2v it00210 1000 100 7 5 3 2 7 5 3 2 10 0.01 3 25 10 0.1 73 257 3 257 1.0 ta=75 c --25 c 25 c 2sc5569 v ce =2v it00211 25 c 25 c --0.01 --0.1 23 57 23 57 2 3 57 --1.0 --10 --10000 7 5 3 2 7 5 3 2 --1000 7 5 3 2 --10 --100 it00213 ta=75 c 75 c 25 c 25 c --25 c ta= --25 c 2SA2016 i c / i b =50 0.01 0.1 23 57 23 57 23 57 1.0 10 10000 1000 7 5 3 2 7 5 3 2 7 5 3 2 100 10 it00215 ta=75 c 25 c --25 c 2sc5569 i c / i b =50 v ce (sat) -- i c v ce (sat) -- i c collector current, i c -- a collector-to-emitter saturation voltage, v ce (sat) -- mv collector-to-emitter saturation voltage, v ce (sat) -- mv collector current, i c -- a v ce (sat) -- i c v ce (sat) -- i c collector current, i c -- a collector-to-emitter saturation voltage, v ce (sat) -- mv collector-to-emitter saturation voltage, v ce (sat) -- mv collector current, i c -- a
2SA2016 / 2sc5569 no.6309-4/5 v be (sat) -- i c v be (sat) -- i c collector current, i c -- a base-to-emitter saturation voltage, v be (sat) -- mv collector current, i c -- a base-to-emitter saturation voltage, v be (sat) -- mv a s o p c -- ta collector dissipation, p c -- w ambient temperature, ta -- c collector-to-emitter voltage, v ce -- v collector current, i c -- a 10000 1000 100 0.01 0.1 1.0 10 ta= --25 c 75 c 7 5 3 2 7 5 3 2 23 57 23 57 23 57 2sc5569 i c / i b =50 it00217 --10000 --1000 --100 --0.01 --0.1 --1.0 --10 ta= --25 c 75 c 7 5 3 2 7 5 3 2 23 57 23 57 2 3 57 2SA2016 i c / i b =50 it00216 25 c 25 c 7 3 100 10 2 5 1000 7 5 3 2 --0.01 257 777 3 --0.1 25 325 3 --1.0 --10 5 it00220 2SA2016 v ce = --10v 7 3 100 10 2 5 1000 7 5 3 2 0.01 257 777 3 0.1 25 325 3 1.0 10 5 it00221 2sc5569 v ce =10v 5 3 2 7 5 3 2 2 7 5 3 100 10 0.1 23 3 3 57 7 57 1.0 2 10 2 55 it00219 2sc5569 f=1mhz 5 3 2 7 5 3 2 2 7 5 3 100 10 5 --0.1 23 3 3 777 5 --1.0 2 --10 2 55 it00218 2SA2016 f=1mhz 0 2.0 1.5 1.3 1.0 0.5 20 060 40 80 100 140 120 160 it00223 10 1.0 0.01 2 7 5 3 2 7 5 3 2 0.1 7 5 3 2 1.0 0.1 10 100 25 37 25 37 25 37 i cp =10a i c =7a 1ms dc operation it00222 2SA2016 / 2sc5569 tc=25 c single pulse for pnp, the minus sign is omitted. 100ms 10ms 2SA2016 / 2sc5569 100 m s 500 m s mounted on a ceramic board (250mm 2 5 0.8mm) cob -- v cb f t -- i c f t -- i c cob -- v cb collector-to-base voltage, v cb -- v output capacitance, cob -- pf collector-to-base voltage, v cb -- v output capacitance, cob -- pf gain-bandwidth product, f t -- mhz collector current, i c -- a collector current, i c -- a gain-bandwidth product, f t -- mhz
2SA2016 / 2sc5569 no.6309-5/5 specifications of any and all sanyo products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. sanyo electric co., ltd. strives to supply high-quality high-reliability products. however, any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of sanyo electric co. , ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. sanyo believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. this catalog provides information as of june, 2005. specifications and information herein are subject to change without notice. ps p c -- tc case temperature, tc -- c collector dissipation, p c -- w 4.0 0 3.5 3.0 2.0 1.5 1.0 0.5 2.5 20 060 40 80 100 140 120 160 p c -- tc it01535 2SA2016 / 2sc5569
|
